Shakuhachi Tuning

Once-production-discontinued "Dial Caliper Gauge for Shakuhachi" are now just qty.1 available!!

A set with 33 tuning cylinders.

4 handles(45cm each), abrasive paper, double-sided adhesive tape included. Detailed instruction for use also included(Japanese only). Bamboo bore is measured with a cylinder(handled attached) which is sized from 13.00mm to 19.4mm (every 0.2mm).

You can also file the bore according to each size by attaching a double-sided adhesive sandpaper. 

Cylinders are made of Aluminum (Japan-made). Product Weight: 1.2 kg/2.5 lb.

Price for One, Leather

Teacher's must-have item! This fan is specially designed to take the time signature for Shakuhachi, Shinobue, Gagaku, Nohkan, Shamisen and many more Japanese musical instruments lessons. 

Size: Width 1.7--3.3 cm, Height: 30cm, Weight: 20g

Shakuhachi Tuning Design Sheet. (Seiritsu only, Not for jinashi)
Price shown is per piece.

Tuning Cylinders of 33 pieces, sizes from 13.00mm to 19.4mm (every 0.2mm).

Requires handles separately. Made of Aluminum (Japan-made).

To be attached to the HM-Style Tuning Set. Size 55cm or 75cm for long flutes. Production discontinued. Limited stock available.

PRODUCTION DISCONTINUED

Design available from 1.2 to 2.3.

Production Discontinued

81 gauges covering 14mm through 22mm every 0.1mm. Each size engraved on the surface. Normally a diameter of 1.3 to 2.3 can be measured. (Comes with a rod and case)

Production discontinued.

Adhesive paper wrapped arround a rod.

Round gage for the shakuhachi inside attached to a 40-cm stainless stick. You can measure from 14mm to 21.5mm. Each size engraved on the surface. Price revised (Sep/2022)