

*Minimum order amount requires 1,000 yen
For Shakuhachi Making: White-Birch-Made Joint Section Insert L size.
-Perfectly cricular middle joint inserts. Use sandpaper to taper before inserting.
Internal diameter 19mm, External diameter 27mm, Height 52mm.
*Minimum order amount requires 1,000 yen
For Shakuhachi Making: White-Birch-Made Joint Section Insert M size.
-Perfectly cricular middle joint inserts. Use sandpaper to taper before inserting.
Internal diameter 17mm, External diameter 25mm, Height 51mm.
Middle Joint Insert Tools. A set of tools that makes easy the difficult task of evening out the lacquer on the joint insert, the surface around it, and the opposite joint into which is set.
Production discontinued, 2023.
Suitable fo trimming the joint section. Reduced price for the pair. *No further discount is applicable.
Production discontinied, 2023
The A rasp is for rounding out the hole for the joint insert,like the hole reamer above, but has no edge. It leaves a smoother surface, making further polishing usually unnecessary.
25.0 mm dia. Insert the rounded section into one section of the joint and tap firmly to make the shape of the bamboo the same as that of the tool. Turn the tool upside down and set into joint so the rounded part just used sticks up,and then lower the other section of bamboo down onto the rounded section. Tap from below to drive the rounded section of the tool into the second part of the joint. This will make both sections of the joint the same size/ shape. Rust-proof resistant.
Dia. 24.0/ 24.5/25.0 mm, All 3 sizes in one set.
24.0 mm dia. Insert the rounded section into one section of the joint and tap firmly to make the shape of the bamboo the same as that of the tool. Turn the tool upside down and set into joint so the rounded part just used sticks up,and then lower the other section of bamboo down onto the rounded section. Tap from below to drive the rounded section of the tool into the second part of the joint. This will make both sections of the joint the same size/ shape. Rust-proof resistant.
9-blade saw is a 7.5mm width. You can change the number of blade easily with 2 nuts. Most suitable for joint's gap making. (Blade: Made in Japan)